VGA and S-VGA test generator TELETEST PC

SKU:
£219.00
219 255 £219.00 - £255.00
Unavailable
per item
A pocket sized, battery powered PC monitor test pattern generator. For fault finding and repairing PC systems with stand alone monitors.

Summary

  • 8 x PC test patterns
  • VGA, S-VGA outs
  • Sync invertor
  • 15 way D-type socket
  • Text book accurate
  • Battery or mains powered

Details

The TELETEST PC is a handheld PC monitor test pattern generator for use by computer engineers and technicians.

Essential for repairing and re-calibrating PC monitors or diagnosing if a fault exists on a video driver card. It can also be used for setting up data projectors or test cabling without having to carry around a PC.

The TELETEST PC generates 8 textbook accurate test patterns at VGA and S-VGA levels. This unit does not produce XGA levels as it assumes that all XGA monitors will take S-VGA signals.

It has a sync inverter switch for dealing with differing specifications.

Powered from either a 9V battery or a mains adapter (available as an optional extras).

Specifications

Video test signals
  • Colour bars: White, yellow, cyan, green, magenta, red, blue & black (100%)
  • Grey scale: 8 equal steps: ~0%, 14%, 29%, 43%, 57%, 72%, 86%, 100%
  • Crosshatch VGA: 8 horizontal & 11 vertical lines; square boxes
  • Crosshatch S-VGA: 10 horizontal & 14 vertical lines; square boxes
  • Dots VGA: 88 dots;
  • Dots S-VGA: 140 dots
  • Red purity: 100% amplitude
  • White purity: 100% amplitude
  • Sync: Sync only, no picture
  • Frequency burst: 7MHz

Explanation for unique patterns
  • Dots: Extremely useful for ensuring good focus and convergence. Ideal for use with data projectors.
  • Red purity: To correct colour purity & check for dooming from stray magnetic fields.
  • White purity: Used as a source of peak white to calibrate the video amp circuitry.
  • 7MHz frequency burst: Shows the resolution of the screen & indicates potential echoing problems or resolution issues with poorly connected cables.

Technical specifications
  • Video output: Analogue RGB 1Vp-p, 75ohm
  • VGA resolution: 640 x 480 @60Hz
  • S-VGA resolution: 800 x 600 @60Hz
  • Video connector: High density 15way D-type socket, fits directly onto the monitor cable
  • Power input: 9-15VDC
  • Power consumption: 12V 100mA, 1.3W
  • DC connector: 2.1mm DC socket (centre= positive)
  • Battery connector: 9V PP3 type alkaline (eg Duracell): 4hrs continual use
  • Temperatures: -
  • Housing: Tough black ABS plastic, hard wearing screen printed front label
  • Dimensions: 80 x 35 x 140mm
  • Weight: 200g

Signal specifications
  • Sync formats: VGA, S-VGA
  • Sync outputs: 1Vp-p, 10kohm
  • Sync invertor switch: Inverts sync to accomodate some monitors

Accessories

Included
  • OZT1500 data sheet

Optional
  • OZP1100     UK 0.3A PSU 9VDC, 2.1mm plug
  • OZP1200     Euro 0.3A PSU 9VDC, 2.1mm plug
  • OZP1212     Universal 3A PSU 12VDC, 2.1mm plug